Dr. ODUSOTE, Jamiu Kolawole

Department:    Materials & Metallurgical Engineering)
Status: Senior Lecturer

Publications in reputable Academic or Professional Journals

Home-Based Publications

  1. Odusote, K., Soliu, G.A., Ahmed, I.I., Abdulkareem, S. & Akande, K.A. (2017): Assessment of Metallic Contaminants in Grinded Millet using Domestic Grinding Machine. Nigeria Journal of Technological Development. 14(1); 13-17, Published by Faculty of Engineering and Technology, University of Ilorin. Available online at: https://www.ajol.info/index.php/njtd/article/view/158865/148486
  2. Omiwale, F., Odusote, J.K. & Alabi, A.G.F. (2017): Tensile Properties and Hardness of Coconut Fibre and Wood Dust Filler Reinforced Polyester Hybrid Composites. USEP: Journal of Research Information in Civil Engineering. 14(1); 1134-1145, Published by Civil Engineering Department, University of Ilorin, Nigeria. Available online at: http://useprice.webs.com/current.htm 
  3. Odusote, J.K., Soliu, G.A., Ahmed, I.I., Abdulkareem, S. &Akande, K.A. (2017): Characterization of Metallic Contaminants Extracted From Ground Millet. Accepted for Publication in Centrepoint Journal (Science Edition). Published by Library and Publication Committee, University of Ilorin, Nigeria, (Letter of acceptance dated 20th February, 2017). Publisher website: http://www.unilorin.edu.ng/ejournals/index.php/science
  4. Odusote, K. Omiwale, T.F. & Alabi, A.G.F. (2017): Flexural Properties And Surface Morphology Of Coconut Fibre And Mahogany Wood Dust Reinforced Polyester Composite. Accepted for Publication in Centrepoint Journal (Science Edition). Published by Library and Publication Committee, University of Ilorin, Nigeria, (Letter of acceptance dated 17th July, 2017). Publisher website: http://www.unilorin.edu.ng/ejournals/index.php/science

National Publications

  1. Mahamood R.M., Aweda J.O., Ajao K.R., Popoola O.T. & Odusote, J.K. (2017): PID Controller Design for Two Link Flexible Manipulator. LAUTECH Journal of Engineering and Technology. 9(2); 17–22, Published by Ladoke Akintola University of Technology, Faculty of Technology, Ogbomoso.
  2. Ahmed, I.I., Alabi, G.F., Odusote, J.K., Aremu, N.I., Adebisi, J.A., Yahaya, T., Talabi, S.I., Yahya, R.A. & Lyon, S.B. (2015): Stress Corrosion Cracking of Austenitic Stainless Steel in Chloride Environment. Nigerian Journal of Engineering. 21(2); 24-28, Published by Faculty of Engineering, Ahmadu Bello University, Zaria.
  3. Muraina, H.O.; Odusote, J.K. & Adeleke, A.A. (2017): Physical Properties of Biomass Fuel Briquette from Oil Palm Residues. Accepted for Publication in Journal of Applied Sciences & Environmental Management (JASEM). 21(4); 777-782, Published by University of Port Harcourt, World Bank assisted National Agricultural Research Programme (NARP) Publisher website: http://www.uniport.edu.ng/publications/pub1/journals/142-journal-of-applied-science-and-environmental-management-jasem.html

International Publications

  1. Odusote, J.K. Cornish, L.A. Chown, L.H. and Erasmus, R.M.  (2012): Isothermal Oxidation Behaviour of a Two-Phase γ/γ’ Precipitation-Hardened Quaternary Pt-Based Alloys in Air at 1350°C. Oxidation of Metals. 78; 123-143, Published by Springer. Available online at DOI: 10.1007/s11085-012-9295-5
  2. Odusote, J.K. Cornish, L.A. and Chown, L.H. (2012): Oxidation Kinetics and Mechanisms of Growth of Alumina Scale on Precipitation-Hardened Pt-Al-Cr-Ru Alloys. Corrosion Science. 63; 119-128, Published by Elsevier. Available online at http://dx.doi.org/10.1016/j.corsci.2012.05.018
  3. Odusote, J.K. & Adeleke, A.A. (2012): Analysis of Properties of Reinforcing Steel Bars: Case Study of Collapsed Building in Lagos, Nigeria. Applied Mechanics and Materials. 204-208; 3052-3056, Published by Trans Tech Publications. Available online at doi:10.4028/www.scientific.net/AMM.204-208.3052
  4. Odusote, K., Ajiboye, T.K. & Rabiu, A.B. (2012) Evaluation of Mechanical Properties of Medium Carbon Steel Quenched in Water and Oil. Assumption University Journal of Technology. 15(4); 218-224, Published by Assumption University. Available online at www.journal.au.edu/au_techno/2012/apr2012/journal154_article02.pdf
  5. Odusote, J.K. Cornish, L.A. and Papo, M. (2012): High Temperature Oxidation of Pt-Al-Cr-Ru Alloy: Scale Morphology and Adherence. Metallography, Microstructure, and Analysis. 1; 142-149, Published by Springer for International Metallographic Society and American Society of Metals (ASM) International. Available online at DOI: 10.1007/s13632-012-0024-x
  6. Adeleke, A.A. & Odusote, J.K. (2013): Evaluation of the Mechanical Properties of Reinforcing Steel Bars from Collapsed Building Site Journal of Failure Analysis and Prevention. 13; 737-743. Published by Springer. Available online at DOI:10.1007/s11668-013-9739-5
  7. Kolawole, S.K. & Odusote, J.K. (2013): Design, Fabrication and Performance Evaluation of a Manual Clay Brick Moulding Machine. Journal of Engineering Science and Technology Review 6 (1); 17-20. Published by Kavala Institute of Technology. Available online at http://www.jestr.org/downloads/Volume6Issue1/fulltext046113.pdf
  8. Odusote, J.K. & Ajayi, O.M. (2013): Corrosion Inhibition of Mild Steel in Acidic Medium by Jathropha Curcas Leaves Extract. Journal of Electrochemical Science and Technology, 4 (2); 81-87. Published by The Korean Electrochemical Society. Available online at http://dx.doi.org/10.5229/JECST.2013.4.2.81.
  9. Odusote, J.K. Cornish, L.A. and Papo, M. (2013): Assessment of the Oxidation Behaviour of a Pt-based Alloy for High Temperature Applications. Journal of Materials Engineering and Performance, 22; 3466-3475. Published by Springer. Available online at DOI: 10.1007/s11665-013-0611-2
  10. Odusote, J.K. Cornish, L.A. Chown, L.H. and Erasmus, R.M. (2013): Determination of Residual Stress in Alumina Scale by Photostimulated Cr3+ Luminescence Piezospectroscopy. Corrosion science. 70; 276-284. Published by Elsevier. Available online at http://dx.doi.org/10.1016/j.corsci.2013.01.041
  11. Odusote, K. Talabi, S.I. and Balogun, S. (2013): Effect of Heat Treatment on Wear Resistance of a Grinding Plate. African Journal of Science and Technology (AJST) Science and Engineering Series. 12 (2); 1-6, Published by African Network of Scientific and Technological Institutions (ANSTI). Available online at http://www.ansti.org/publications/UNESCO%20AJST%20Vol%2012%20FINAL.pdf
  12. Odusote, K., Talabi, S.I. & Agodinrin, G. (2014): Effect of Heat Treatment on Hardness and Wear Resistance of A Failed Automobile Brake Disc. ACTA TEHNICA CORVINIENSIS – Bulletin of Engineering. VII; 129-132. Published by University “POLITEHNICA” Timisoara, Faculty of Engineering Hunedoara, ROMANIA. Available online at http://acta.fih.upt.ro/pdf/2014-2/ACTA-2014-2-20.pdf
  13. Ajayi, O.M., Odusote, J.K. & Yahaya, R.A. (2014): Inhibition of Mild Steel Corrosion Using Jatropha Curcas Leaf Extract. Journal of Electrochemical Science and Engineering. 4 (2); 67-74. Published by International Association of Physical Chemists. Available online at doi: 10.5599/jese.2014.0046
  14. Odusote, J.K. Cornish, L.A. and Papo, M. (2014): Measurement of the Stress in Oxide Scales Developed Upon Oxidation of a Pt-Based Alloy in Air at 1250°C. International Journal of Applied Ceramic Technology. 11 (3); 602-610. Published by Wiley online library for The American Ceramic Society.  Available online at DOI:10.1111/ijac.12055
  15. Odusote, J.K., Adeleke, A.A. & Ajayi, P.A. (2015): Mechanical Properties and Microstructure of Precipitation-Hardened Al-Cu-Zn Alloys. International Journal of Automotive and Mechanical Engineering. 12; 3033-3042, Published by Universiti Malaysia Pahang, Pekan, Pahang, Malaysia. Available online at DOI: http://dx.doi.org/10.15282/ijame.12.2015.2.0252.
  16. Odusote, J.K. Adekunle, A.S. & Rabiu, A.B. (2015): Effect of Vegetable Oil Quenchants on the Properties of Aluminum during Solution Heat Treatment. Journal of Mechanical Engineering and Science. 8; 1343-1350. Published by Universiti Malaysia Pahang, Pekan, Pahang, Malaysia. Available online at DOI:http://dx.doi.org/10.15282/jmes.8.2014.9.0131 
  17. Odusote, J.K. & Kolawole, S.K. (2015): Assessment of Suitability of Vegetable-Based Oils as Cutting Fluids in Drilling Operation. Annals of Faculty Engineering Hunedoara-International Journal of Engineering. XIII; 169-174, Published by University “POLITEHNICA” Timisoara, Faculty of Engineering Hunedoara, ROMANIA. Available online at http://annals.fih.upt.ro/pdf-full/2015/ANNALS-2015-2-30.pdf
  18. Odusote, J.K. (2015): Design and Fabrication of a Polythene/Nylon Wastes Recycling Machine. ACTA TEHNICA CORVINIENSIS – Bulletin of Engineering. VIII; 153-156, Published by University “POLITEHNICA” Timisoara, Faculty of Engineering Hunedoara, ROMANIA. Available online at http://acta.fih.upt.ro/pdf/2015-2/ACTA-2015-2-29.pdf
  19. Odusote, K., Oyewo, A. T., Adebisi, J. A. & Akande, K.A. (2016): Mechanical Properties of Banana Pseudo Stem Fibre Reinforced Epoxy Composite as a Replacement for Transtibial Prosthetic Socket. The Journal of The Association of Professional Engineers of Trinidad and Tobago. 44 (2); 4-10, Published by The Association of Professional Engineers of Trinidad and Tobago. Available online at: http://www.apett.org/home/images/journal/vol44n2/M01_16015_v44n2p4-10JKOdusote_Nov2016.pdf
  20. Alabi, AGF, Ayoade, A.O., Odusote, K. & Adeleke, A.A. (2016) Assessment of Suitability of Nigerian Made Steel Bars for Structural Applications. The Journal of The Association of Professional Engineers of Trinidad and Tobago. 44 (2); 17-23, Published by The Association of Professional Engineers of Trinidad and Tobago. Available online at: http://www.apett.org/home/images/journal/vol44n2/M03_16021_v44n2p17-23AGFAlabi_Nov2016.pdf
  21. Odusote, J.K. & Ajayi, O.M. (2016): Corrosion Inhibitive Properties of Extract of Jatropha Curcas Leaves on Mild Steel in Hydrochloric Acid Environment. Iranian Journal of Materials Science and Engineering. 13(3); 1-11, Published by Iran University of Science and Technology (IUST), Iranian Metallurgical Society and Iranian Ceramic Society. Available online at: http://ijmse.iust.ac.ir/browse.php?a_id=686&sid=1&slc_lang=en
  22. Adepoju, A.D., Adebisi, A., Odusote, J.K., Ahmed, I.I. & Hassan, S.B. (2016): Preparation of Silica from Cassava Periderm. Journal of Solid Waste Technology and Management. 42(3); 216-221, Published by Widener University School of Engineering. Available online at http://dx.doi.org/10.5276/JSWTM.2016.216
  23. Odusote, J.K. & Oyewo, A. T. (2016): Mechanical Properties of Pineapple Leaf Fibre Reinforced Polymer composites for Application as Prosthetic Socket. Journal of Engineering and Technology(JET). 7(1); 125-139, Published by Malaysian Technical Universities Network (MTUN). Available online at: http://journal.utem.edu.my/index.php/jet/article/view/841/pdf_21
  24. Odusote, J. and Ajayi, P.A. (2016): Mechanical Properties and Microstructure of Recycled Aluminum Cast with Copper and Zinc Additions. International Journal of MetalCasting. 10(4); 483-490, Published by Springer for American Foundry Society. doi: 10.1007/s40962-016-0060-4
  25. Odusote, J.K., Onowuma, S.A. & Fodeke, E.A. (2016): Production of Paper Board Briquette Using Waste Paper and Sawdust. The Journal of Engineering Research (TJER). 13(1); 80-88, Published by College of Engineering, Sultan Qaboos University, Sultanate of Oman. Available online at: http://www.tjer.net/site/issue13-1/Paper7.pdf
  26. Odusote, J.K., Owalude, D.O., Olusegun, S.J. & Yahya, R.A. (2016): Inhibition Efficiency of Moringa Oleifera Leaf Extract on the Corrosion of Reinforced Steel Bar in HCl Solution. The West Indian Journal of Engineering. WIJE, 38(2); 64-70, Published by Faculty of Engineering, The University of the West Indies, Trinidad and Tobago, West Indies. Available online at: https://sta.uwi.edu/eng/wije/documents/WIJE_v38n2_Jan2016Completed.pdf
  27. Odusote, J.K. & Moshood, M.A. (2016): Production and Determination of the Effect of Vegetable Oil-based Cutting Fluids on AISI 1033 Steel in a Turning Operation. Journal of Production Engineering (JPE), 19(1); 35-40, Published by Department of Production Engineering, Faculty of Technical Sciences, UNIVERSITY OF NOVI SAD, SERBIA. Available online at: http://www.jpe.ftn.uns.ac.rs/papers/2016/no1/6-Odusote_JPE_19_No1.pdf
  28. Odusote, K. & Muraina, H.O. (2017): Mechanical and Combustion Characteristics of Oil Palm Biomass Fuel Briquette. Journal of Engineering and Technology(JET). 8(1); 14-29, Published by Malaysian Technical Universities Network (MTUN). Available online at: http://journal.utem.edu.my/index.php/jet/article/view/1121

 

  1. Abdul, J.M., Chown, L.H., Odusote, K., Nei, J. Young, Kwo-Hsiung & Olayinka, W.T. (2017). Hydrogen Storage Characteristics and Corrosion Behavior of Ti24V40Cr34Fe2 Alloy. Batteries. 3(2); 19, Published by Multidisciplinary Digital Publishing Institute (MDPI), Basel, Switzerland, in a Special Issue tagged “Nickel Metal Hydride Batteries 2017”. doi: 10.3390/batteries3020019

 

  1. Odusote, K., Ayanda, O.S. & Yahya, R.A. (2017): Inhibition of Corrosion of Galvanized Steel Sheet in 1M HCl and H2SO4 by Plukenetia conophora Leaf Extract. African Corrosion Journal. 2 (2); 14-18, Published by Corrosion Institute of Southern Africa. Available online at: http://africorr.org.za/African-Corrosion-Journal/

 

     (ii) Published Book

 

  1. Jamiu Odusote (2015): High Temperature Oxidation of Pt-based Alloys. OmniScriptum GmbH & Co. KG, Saarbrücken, Germany: Published by Scholars’ Press. ISBN: 978-3-639-76343-0. URL:  scholars-press.com.

Edited Conference Proceedings

  1. Odusote, K. Cornish, L.A. & Papo, J.M. (2011): Morphology and Adherence of Alumina Scale on Pt-Al-Cr-Ru Alloy Oxidised in Air at 1350°C. Proceedings of the 27th NMS Conference Abuja, B.A. Okorie & S.B. Hassan (eds.) 227-232. Published by Nigerian Metallurgical Society. URL: http://www.nigerianmetsociety.org/
  2. Talabi, S.I., Odusote, J.K., Alabi, A.G.F., Olorunmaiye, J.A. (2014). Reviewing Engineering Curricula to Meet Industrial and Societal Needs. Proceedings of 2014 International Conference on Interactive Collaborative Learning (ICL), Dubai, UAE, A. Auer & S. Schreiter (eds.) 55-59. Published by IEEE. URL: http://ieeexplore.ieee.org/document/7017747/ DOI: 10.1109/ICL.2014.7017747
  3. Tanimowo, S.O., Odusote, K. & Olabanji, A.S. (2016): Computer-aided Desgn and Drafting of Welding Neck Flange. Proceedings of the 15th Annual International Conference/ Nigerian Materials Congress (NIMACON 2016), A. Giwa, A.O. Ameh, J.I. Yagang, S.G. Bawa & M.T. Sanni (eds.) 539-549. Published by Materials Science and Technology Society of Nigeria. URL: https://nimacon2016.abu.edu.ng/

Other Edited Conference Proceedings

  1. Odusote, K., Muritala, A.A. & Oyawale, F.A. (2012): Design and Fabrication of Polythene/Nylon Wastes Recycling Machine. Proceedings of the 4th Annual and 2nd International Conference of Civil Engineering, B.F. Sule, A.A. Adedeji & Y.A. Jimoh (eds.) 95-101. Published by Department of Civil Engineering, Faculty of Engineering and Technology, University of Ilorin, Ilorin. URL: www.unilorin.edu.ng
  2. Adekunle, A.S., Odusote, J.K. and Rabiu, A.B. (2012): Effect of Using Vegetable Oils as Quenching Media for Pure Commercial Aluminium. Proceedings of the 2012 International Conference on Clean Technology and Contemporary Engineering Technology (ICCEM 2012), A. Oyawale & S.O. Oyedepo (eds.) 321-325. Published by Department of Mechanical Engineering, Covenant University, Ota, Ogun state. URL: http://www.covenantuniversity.edu.ng/
  3. Cornish, L.A. Shongwe, M.B. Odera, B. Odusote, K. Witcomb, M.J. Chown, L.H. Rading, G.O. and Papo, M.J. (2012): Update on the Development of Pt-based Alloys for Potential High Temperature Applications. Proceeding of the 2012 Conference of The Southern African Institute of Mining and Metallurgy (Platinum 2012), G. Smith (ed.) 905-924. Published by The Southern African Institute of Mining and Metallurgy (SAIMM), South Africa. URL: http://www.saimm.co.za/Conferences/Pt2012/
  4. Odusote, J., Adebisi, J.A., Adeleke, A.A. and Abegunde, M.A. (2013): Effect of Heat Treatment on the Mechanical Properties of Reinforced Steel Bar. Proceedings of 2013 Annual National Conference and Technology Exhibition of the Nigerian Society of Engineers, Metallurgical, Mining and Materials Division (Port Harcourt 2013), D.E. Esezobor, E. Ochoga, I.N. Aremu (eds.) 10-16. Published by: The Nigerian Society of Engineers-Metallurgical, Mining &Materials Division. URL: http://www.metminmat.org/