NAME: Sulaiman Abdulkareem

FACULTY: Engineering

DEPARTMENT: Mechanical Engineering

RANK: Senior Lecturer

HIGHEST QUALIFICATION: PhD

E-MAIL:This email address is being protected from spambots. You need JavaScript enabled to view it.;               This email address is being protected from spambots. You need JavaScript enabled to view it.

PHONE: +234(0)805-821-9222,

RESEARCH INTEREST: Traditional & Non-Traditional Machining Techniques, Precision & Micro-machining, Materials Characterization, Modelling, and Applications of Design of Experiments

 


List of Publications

 

  1.  Suleiman Abdulkareem, A. A. Khan and Z. M. Zain Effect of Machining Parameters on Surface Roughness During Wet and Dry Wire-EDM of Stainless Steel. Journal of Applied Sciences, 2011. ISSN 1812-5654/DOI: 10.3923/jas.2011
  2. Suleiman Abdulkareem, Usman Jibrin Rumah and Apasi Adaokoma Optimizing Machining Parameters during Turning Process. International Journal of Integrated Engineering, Vol. 3 No. 1 (2011) p. 23-27. http://penerbit.uthm.edu.my/ojs/index.php/ijie
  3. Suleiman Abdulkareem, Ahsan Ali Khan and Zakaria Mohd Zain Experimental Investigation of Machining Parameters on Surface Roughness in Dry and Wet Wire-Electrical Discharge Machining. Advanced Materials Research Vols. 264-265 (2011) pp 831-836. doi:10.4028/www.scientific.net/AMR.264-265.831 Trans Tech Publications, Switzerland.
  4. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh Influence of Electrode Cooling on Recast Layers and Micro Crack in EDM of Titanium. Advanced Materials Research Vols. 264-265 (2011) pp 1180-1186. doi:10.4028/www.scientific.net/AMR.264-265.1180. Trans Tech Publications, Switzerland
  5. Ahsan Ali Khan, Suleiman Abdulkareem, Nadiatul Amirah Ahmad Abdul Ghani and Dayanna Sarrah Mohammad Ariffin Investigation on the Surface Finish, MRR and the Surface Damage during EDM of Tungsten Carbide. Advanced Materials Research Vols. 264-265 (2011) pp 1073-1078 doi:10.4028/www.scientific.net/AMR.264-265.1073. Trans Tech Publications, Switzerland.
  6. Suleiman Abdulkareem, Ahsan Ali Khan and Mohammed Konneh Influence of Electrode Cooling on Material Migration among Electrodes during EDM of Titanium Alloy. Advanced Materials Research Vols. 264-265 (2011) pp 1199-1204 doi:10.4028/www.scientific.net/AMR.264-265.1199. Trans Tech Publications, Switzerland
  7. Zakaria Mohd Zain, Ahsan Ali Khan and Suleiman Abdulkareem Influence of Electrode Profiles on Electrical Discharge Machining of Titanium. Advanced Materials Research Vols. 264-265 (2011) pp 1205-1210. doi:10.4028/www.scientific.net/AMR.264-265.1205. Trans Tech Publications, Switzerland
  8. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh. “Cooling Effect on Electrode and Process Parameters in EDM”. International Journal of Materials and Manufacturing Processes, 25: 6, 462-466 DOI: 10.1080/15394450902996619. http://dx.doi.org/10.1080/15394450902996619 (2010)
  9. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh “Reducing Electrode Wear Using Cryogenic Cooling During Electrical Discharge Machining”. Journal of Advance Materials Research, vol. 83-86, (2010) pp. 672-679. http://www.ttp.net .doi:10.4028/www.scientific.net/AMR. 83-86.672
  10. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh“Reducing Electrode Wear Ratio Using Cryogenic Cooling During Electrical Discharge Machining”. International Journal of Advanced Manufacturing Technology (IJAMT). vol. 45, issue 11 (2009) pp. 1146-1151 DOI: 10.1007/s00170-009-2060-5
  11. Suleiman Abdulkareem, Ahsan Ali Khan and Abdurrahman Suleiman“Cryogenic Effect on Surface Integrity in Electrical Discharge Machining of Titanium”. Global Journal of Mechanical Engineerng. Department of Mechanical Engineering, University of Uyo, Nigeria. Vol. 10, Number 1 (2009) pp. 46-50. ISSN: 1595-7578
  12. Suleiman Abdulkareem and Ahsan Ali Khan“Modelling of EDM Process Parameters for Machining Stainless Steel Using Copper Electrodes”. International Journal for Manufacture Science & Production Volume 9, Nos. 1-2, 2008
  13. Suleiman Abdulkareem, A. A. Khan and Z. M. Zain Effect of Machining Parameters on Surface Roughness During Wet and Dry Wire-EDM of Stainless Steel. Journal of Applied Sciences, 2011. ISSN 1812-5654/DOI: 10.3923/jas.2011
  14. Suleiman Abdulkareem, Usman Jibrin Rumah and Apasi Adaokoma Optimizing Machining Parameters during Turning Process. International Journal of Integrated Engineering, Vol. 3 No. 1 (2011) p. 23-27. http://penerbit.uthm.edu.my/ojs/index.php/ijie
  15. Suleiman Abdulkareem, Ahsan Ali Khan and Zakaria Mohd Zain Experimental Investigation of Machining Parameters on Surface Roughness in Dry and Wet Wire-Electrical Discharge Machining. Advanced Materials Research Vols. 264-265 (2011) pp 831-836. doi:10.4028/www.scientific.net/AMR.264-265.831 Trans Tech Publications, Switzerland.
  16. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh Influence of Electrode Cooling on Recast Layers and Micro Crack in EDM of Titanium. Advanced Materials Research Vols. 264-265 (2011) pp 1180-1186. doi:10.4028/www.scientific.net/AMR.264-265.1180. Trans Tech Publications, Switzerland
  17. Ahsan Ali Khan, Suleiman Abdulkareem, Nadiatul Amirah Ahmad Abdul Ghani and Dayanna Sarrah Mohammad Ariffin Investigation on the Surface Finish, MRR and the Surface Damage during EDM of Tungsten Carbide. Advanced Materials Research Vols. 264-265 (2011) pp 1073-1078 doi:10.4028/www.scientific.net/AMR.264-265.1073. Trans Tech Publications, Switzerland.
  18. Suleiman Abdulkareem, Ahsan Ali Khan and Mohammed Konneh Influence of Electrode Cooling on Material Migration among Electrodes during EDM of Titanium Alloy. Advanced Materials Research Vols. 264-265 (2011) pp 1199-1204 doi:10.4028/www.scientific.net/AMR.264-265.1199. Trans Tech Publications, Switzerland Zakaria Mohd Zain,
  19. Ahsan Ali Khan and Suleiman Abdulkareem  Influence of Electrode Profiles on Electrical Discharge Machining of Titanium. Advanced Materials Research Vols. 264-265 (2011) pp 1205-1210. doi:10.4028/www.scientific.net/AMR.264-265.1205. Trans Tech Publications, Switzerland
  20. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh. “Cooling Effect on Electrode and Process Parameters in EDM”. International Journal of Materials and Manufacturing Processes, 25: 6, 462-466 DOI: 10.1080/15394450902996619. http://dx.doi.org/10.1080/15394450902996619 (2010)
  21. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh“Reducing Electrode Wear Using Cryogenic Cooling During Electrical Discharge Machining”. Journal of Advance Materials Research, vol. 83-86, (2010) pp. 672-679. http://www.ttp.net .doi:10.4028/www.scientific.net/AMR. 83-86.672
  22. Suleiman Abdulkareem, Ahsan Ali Khan and Mohamed Konneh“Reducing Electrode Wear Ratio Using Cryogenic Cooling During Electrical Discharge Machining”. International Journal of Advanced Manufacturing Technology (IJAMT). vol. 45, issue 11 (2009) pp. 1146-1151 DOI: 10.1007/s00170-009-2060-5
  23. Suleiman Abdulkareem, Ahsan Ali Khan and Abdurrahman Suleiman“Cryogenic Effect on Surface Integrity in Electrical Discharge Machining of Titanium”. Global Journal of Mechanical Engineerng. Department of Mechanical Engineering, University of Uyo, Nigeria. Vol. 10, Number 1 (2009) pp. 46-50. ISSN: 1595-7578
  24. Suleiman Abdulkareem and Ahsan Ali Khan“Modelling of EDM Process Parameters for Machining Stainless Steel Using Copper Electrodes”. International Journal for Manufacture Science & Production Volume 9, Nos. 1-2, 2008