Oni K. C




His Publication are as follows:


  1. Olaoye, J. O.,  K. C. Oni and M. O. Olaoye.; 2009, Computer applications for Selecting Operating Parameters in A Stationary Grain Crop Thresher. Proceedings of the 9th International Conference & Annual General Meeting of the Nigeria Computer Society, www.ncs.org.ng. MaCGlobe’ 09. Bada et al. (Editor). 20: 79 – 94. Published by NCS.
  1. Mamman, E. and K. C. Oni, 2009. The Effect of the Interaction of Design and Operating Parameters on Draught of Model Chisel Furrowers. NJERD, 8(3): 37 – 47.
  2. Oni K.C., 2009. Adoption of Appropriate Agricultural Technologies for Commercial Arable Crops Farming in Nigeria. An Invited Paper Presented at the Workshop on Commercial Farming of Arable Crops in Nigeria Organized by the Nigerian Agricultural, Co-operative and Rural Development Bank Ltd, held at Kwara Hotel, Ilorin, 16th – 18th June, 2009
  3. Oni, K. C., 2008. Revitalizing the agricultural and rural sectors for sustainable national development: the NCAM perspective. Invited paper delivered in a Symposium at the Annual General Meeting/National Conference of the Nigerian Institute of Public Relations holding at Roemichs Hall, Ilorin, on November 28, 2008.
  4. Mamman, E. and K. C. Oni, 2007. Development of an Indoor Soil Bin for Investigating Performance of Model Tillage Tools. Nigerian Journal of Engineering Research and Development (NJERD), 6(2): 12 – 22.
  5. Oni, K. C., 2007. Brief on the National Centre For Agricultural Mechanization (NCAM) submitted to the Honourable Minister of the Federal Ministry Of Agriculture and Water Resources (FMA&WR) in Abuja on Monday, 13th August, 2007.
  6. Mamman, E. and K. C. Oni, 2005. Draught Performance of a Range of Model Chisel Furrowers. Agricultural Engineering Internal: the CIGR Ejournal, Manuscript PM 05 003, Vol. VII. 17pp.
  7. Mamman, E. and K. C. Oni, 2005. Design and Operating Effects of Parameters on Draught of Model Chisel Furrowers in an Artificial Soil. Journal of Agricultural Engineering and Technology (JAET), 13: 4 – 17.
  8. Mamman, E., K. C. Oni and A. T. Ajiboy, 2004. Design and construction of an instrumentation on system for measuring forces on model tillage tools. Nigerian Journal of Technological Development (NJTD), 4(1): 37 – 48.
  9. Shebi, J.G., K.C. Oni and F.G. Braide, 1988. Comparative Tractive Performance of Three Tractors. J. of A.M.A., 19 (2): 25-29.
  10. Oni,K.C., 1989. Performance Analysis of Ridge Profile Rotary Weeders J. of A.M.A., 21 (1): 43 – 48.
  11. Oni, K.C. and J.S. Adeoti, 1995. Mechanical Land Clearing and Tractor Traffic Effects on Agricultural Soils and Crop Growth. J. of A.M.A., 26(4): 25 – 28.
  12. Oni, K.C., 1991. Traffic Compaction and Tillage Effects on the Performance of Maize in Sandy Loam Soil of Nigeria. J. of A.M.A., 22(2): 27 – 31.