Name: Dr. Olaoye J.O
Faculty: Engineering
Department: Agricultural and Biosystems
Status: Senior Lecturer


 Publications

 

  1. Olaoye* J.O. and S. J. Boluwafayi (2000), "Design, Fabrication and Performance of a multi-purpose Row Planting Machine"Journal of Sustainable Agriculture and the Environment (J. Sustain. Agric. Environ.), 3(1): 7 – 20. Nigeria. Published by Michael Okpara University of Agriculture, Umudike, P.M.B. 7267, Umuahia, Abia State, Nigeria.
  2. Olaoye, J. O. and A. O. Rotimi. 2010. “Measurement of Agricultural Mechanization Index and Analysis of Agricultural Productivity of some Farm Settlements in South West, Nigeria”. Agricultural Engineering International: the CIGR Ejournal. Manuscript 1372. Vol XII, January 2010.  http://www.cigrjournal.org/index.php/Ejounral/article/view/1372
  3. Olaoye, J. O. 2007. An Evaluation of Farm Power and Equipment Ownership and Management in Niger State, Nigeria. Nigeria Journal of Technological Development (NJTD), 5(2): 94 – 102. Published by the Faculty of Engineering & Technology, University of Ilorin, Ilorin.
  4. Oyeleke, F. I.; J. O. Olaoye and S. A. Faseyi; 2004, Capacity Utilization of Wet Land (Fadama) Infrastructure in Kwara State, Nigeria. Nigeria. Nigeria Journal of Technological Development (NJTD), 4(1): 64 – 72. Published by the Faculty of Engineering & Technology, University of Ilorin, Ilorin. 
  5. Olaoye, J. O. ; A. F. Alonge and B. A. Adams; 2003, Effects of Die Diameter, Mix Ratio, Compressive Force on Briquetting of Palm Mush. Nigeria. Nigeria Journal of Technological Development (NJTD), 3(1&2): 27 - 36. Published by the Faculty of Engineering & Technology, University of Ilorin, Ilorin. 
  6. Olaoye, J. O.;  2002, Influence of Tillage on Crop Residue Cover, Soil Properties and Yield Components of Cowpea in Derived Savannah Ectones of Nigeria. Soil Tillage Research (STILL), Soil and Tillage Research, 64: 179 – 187. published for International Soil Tillage Research Organization (ISTRO) by Elsevier Science Limited, B.V. Molenwerf 1, 1014 AG Amsterdam, The Netherlands.
  7. Olaoye, J. O. ; 2001, Enhancement of Oil Extraction of Shea Butter Using an Optimised Dillution / Clarification Protocol. Journal of Sustainable Agriculture and the Environment (J. Sustain. Agric. Environ.), 3(2): 353 – 360. Nigeria. Published by Michael Okpara University of Agriculture, Umudike, P.M.B. 7267, Umuahia, Abia State, Nigeria.
  8. Olaoye, J. O. and O. O.Babatunde,2001 Development and Testing of a Milled Shea Nut Mixer. Journal of Food Science and Technology, 38(5): 471 – 475. The Association of Food Scientists and Technologist (India), Central Food Technological Research Institute Campus, Mysore – 570 013, India. 
  9. Olaoye, J. O.;  2000,  Some Engineering properties of Castor Nut Relevant to the Design of Processing Equipment.  Journal of Agricultural Engineering Research (JAER). 77(1): 113 – 118. Published for Silsoe Research Institute by ACADEMIC PRESS , London. U.K. 
  10. Akoshile, C. O. and J. O. Olaoye. 2009. Adapting Dedicated Hydrodam for Electrical Power Generation – Unilorin Case Study. A paper presented at a 2 – Day Seminar on Hydropower Resources: Development, Management and the Environment Organized by the National Centre for Hydropower Research and Development (An Agency of Energy Commission of Nigeria), University of Ilorin, Ilorin, Nigeria on 19th – 20th  August, 2009.http://www.unilorin.edu.ng/unilorin/nachrede/Adapting%20Dedicated%20Hydrodam%20for%20Electrical%20Power%20Generation.htm
  11. Oyewole, S. N. and Olaoye, J. O. 2013. Effect of Drying and Blanching Parameters on Drying Rate of ‘Poudo’ Yam. International Journal of Scientific & Engineering Research. 4(1): 1 - 9. Published by International Journal of Scientific & Engineering Research. 10685-B, Hazelhurst Houston, TX 77043, USA. http://www.ijser.org.  ISSN 2229-5518.
  12. Olaoye, J. O., O. D. Samuel and T. A. Adekanye. 2012. Performance Evaluation of an Indigenous Rotary Power Weeder. Energy and Environmental Engineering Journal. 1(2):94 - 97. Published by the Academic Society of Science, Engineering and Technology. Kuala Lumpur, Malaysia, www.assetedu.org/.
  13. Olaoye, J. O. 2012. Development Status of Production and Processing Machinery of Shea Oil from a   Woody Oil Plant in Nigeria. International Journal of Science & Emerging Technologies. IJSCSET. Vol. 3. No. 6: 107 – 115. Published by ExcelingTech. Pub. UK. E-ISSN: 2044-6004. (http://excelingtech.co.uk/).
  14. Olaoye, J. O. 2012. Challenges of Weeding Operation in Intercropping and Mixed Cropping Systems in Nigeria. Agrociencia Uruguay, Special Issue. 144 – 151.  Agrociencia es una revista arbitrada, editada en conjunto por la Facultad de Agronomía de la Universidad de la República y el Instituto Nacional de Investigación Agropecuaria, Uruguay. Agrociencia (http://www.fagro.edu.uy/~agrociencia/index.php/directorio/index).
  15. Olaoye, J. O. and S. N. Oyewole.  2012.  Optimization of some "Poundo" Yam Production Parameters.  Agric Eng Int: CIGR Journal, Manuscript 2063. 14 (2): 1 – 15. Published by International Commission of Agricultural and Biosystems Engineering. No.1, Beishatian, Deshengmenwai, Chaoyang District, Beijing 100083, China. http://www.cigrjournal.org/index.php/Ejounral/index
  16. Olaoye, J. O. and A. O. Oyelade. 2012, Synthesis and Analysis of a Slider Crank Linkages in Sugarcane Juice Extractor. Global Journal of Pure & Applied Science and Technology (GJPAST). 2(1): 10 – 26. Published by GJPAST, 32-7, Balaji  Flats,  Ariyagowda Salai , West Mambalam, Chennai, Tamilnadu, Pincode – 600 033.ISSN: 2249 – 7188. http://gjpast.com/Vol2Iss1.php
  17. Olaoye, J. O. 2011. Design and Construction of a Reflux Column Distillation Unit for Bio-Ethanol Production from Sugarcane Substrate. Nigeria Journal of Technological Development (NJTD). 8(1): 48 - 60.Published by the Faculty of Engineering & Technology, University of Ilorin, Ilorin.
  18. Olaoye, J. O. and T. A. Adekanye. 2011. Analysis of the Motion of Weeding Tools and Development of a Rotary Power Weeder. Journal of Agricultural Engineering and Technology (JAET). 19(2): 9 – 25. Published by the Nigerian Institution of Agricultural Engineers (NIAE) (A Division of Nigerian Society of Engineers). National Centre for Agricultural Mechanization (NCAM), Ilorin, Nigeria. ISSN 014 – 2222.
  19. Olaoye, J. O. 2011, Development of a Treadle Operated Abrasive-Cylinder for Threshing Cowpea. International Journal of Engineering Science and Technology (IJEST). 3(12): 8548 – 8557.Published by Engineering Journals Publications. 4/122, 2nd Floor, Perumal Naicker Complex, G.S.T. Road, Otteri, Vandalur, Chennai - 600048, India. http://www.ijest.info/ ISSN: 0975-5462.
  20. Olaoye, J. O. 2011, Development of Small Scale Equipment for Depulpping Locust Bean Seeds. International Journals of Engineering and Science. IJENS. Vol. 11(6): 173 – 186. Published by IJENS.  ISSN: 2077 – 1185. Rawalpindi, Pakistan, http://www.ijens.org.
  21. Olaoye, J. O. 2011, Development of a Sugarcane Juice Extractor for Small Scale Industries. Journal of Agricultural Technology. Vol. 7(4): 931-944. Published by Association of Agricultural Technology in Southeast Asia (AATSEA), 2046 Sinthorn On-nuch, On-nuch Ladkrabang Road, Ladkrabang Bangkok 10520, Thailand Available online http://www.ijat-aatsea.com. ISSN 1686-9141.
  22. Olaoye, J. O. and O. O. Babatunde. 2011.  Coefficient of Friction of Agricultural Materials and Stone as it Affects Particle Motion and Separation of Inclined Belt Conveyor. LAUTECH Journal of Engineering and Technology (LAUJET). 6(2): 64 – 71. Published by Faculty of Engineering and Technology, Ladoke Akintola University of Technology, Ogbomoso, Nigeria. ISSN: 1597 - 0000-
  23. Olaoye, J. O. S. E. Sunmonu. 2011. Development of Management Tool and Computerization of Mechanized Aquacultural Farm Operations. Advances in Environmental Biology, 5(10): 3322-3332, ISSN 1995-0756. Published by American-Eurasian Network for Scientific Information,  Department of Biological Sciences, Al Hussein Bin Talal University, Maan, P.O. Box 20, Jordan. http://www.aensiweb.com/aeb_September_2011.html.
  24. Olaoye, J. O., K. C. Oni and M. O. Olaoye.; 2010, Computer applications for Selecting Operating Parameters in A Stationary Grain Crop Thresher. International Journal of Agricultural and Biological Engineering. 3(3):8 – 18. Published by Chinese Society of Agricultural Engineering (CSAE) and Association of Overseas Chinese Agricultural, Biological and Food Engineers (AOCABFE).Room 506, No. 41, Maizidian Street, Chaoyang District, Beijing 100125, China. http://www.ijabe.org.