Ajiboye. T.K

 

 


His Publication are as follows:

 

  1. Ajiboye, T.K. (2005), "Finite Element Thermal Modeling Applied to Furnace Cooling and Refractory Design", Journal of Engineering and Technology 3(1): pp 23 - 29.
  2. Alabi, A. G. F. Ajiboye, T.K, and Olusegun, H D (2010) “Measuring the Stress, Strain and Strain-rate in Heat Treated Medium Carbon Steel samples and finding the Constituited Material related Properties”. African Journal of Mathematics and Computer Science Research Vol. 3(3), pp. 038-048. (Published by African Journal of Mathematics and Computer Science Research http://www.academicjournals.org/AJMCSR ISSN 2006-9731 
  3. Alabi, A. G. F., Ajiboye, T. K. and Olusegun, H. D. (2010)” Investigating the cutting forces in heat treated medium carbon steel when turning on a lathe machine” Journal of Engineering Design and Technology; vol8(1), pp80 – 93. (Published by Emerald Publishers, U.K.) http://www.emeraldinsight.com/10.1108/17260531011034664 
  4. Ajiboye, T. K. and Olusegun, H. D. (2009) “Investigating the Anthropogenic Global Warming in Ilorin and surroundings” Journal of Applied Sciences Research, vol5(10), 1476-1499. (Published by International Network for Scientific Information Faisalabad, Punjab, Pakistan). http://www.insipub.com/index.html 
  5. Ajiboye, T. K. and Olusegun, H. D. (2009) “The Design, construction and testing of a vertical squeeze cassava pulp dewatering machine”. Journal of Applied Sciences Research, vol5(10), 1285-1297. (Published by International Network for Scientific Information Faisalabad, Punjab, Pakistan). http://www.insipub.com/index.html 
  6. H. D. Olusegun and Ajiboye, T. K. (2009) “Design, Construction and Testing of vibrator-compactor Block making Machine for rural Application”, International Journal of Engineering, Vol. 3, No. 1, pp 1 - 14. (Published by International Centre for Advanced studies, India). http://casi.ssc.upenn.edu 
  7. Ajiboye, T. K. and Olusegun, H. D. (2009) “The Reduction of Environmental Pollution by managing Waste in a newly constructed Thermal Treatment Appliance”, International Journal of Pure and Applied Science, Vol. 2 No 1, pp 85 - 92 (Published by Pan African Book Company, Ghana). http://napress1.tripod.com/index.html 
  8. Ajiboye, T. K. and Olusegun, H. D. (2008) “An Investigation of energy release on some Lubricant using the Shock Response Spectra Technique” International Journal of Engineering, Vol. 2, No. 3, pp 325-336. (Published by International Centre for Advanced studies, India). http://casi.ssc.upenn.edu 
  9. Ajiboye, T. K. (2008); Computer Modelling of the Operating Performance of Gas/Fuel Fired Furnaces, International Journal of Engineering, Vol 2 (2), pp 183- 200. (Published by International Centre for Advanced studies, India). http://casi.ssc.upenn.edu
  10. Ajiboye, T. K. “Organizing and Planning of Maintenance work in Turbine and Compressors” Proceeding of the Workshop on Management and maintenance of Vibration in Hydro-turbine Plants and Compressors, National Center for Hydropower Research and Development (NACHRED), University of Ilorin, Ilorin, Nigeria.
  11. Ajiboye, T. K. and Yusuf, W. B. (2011) “Computer Aided Design for Maintenance Planning and Assessment for a Construction Company” Epistemic in Science and Engineering, Vol1, No.3, pp
  12. Ajiboye, T. K. and Adeyemi, M. B., (2003), “Computer Aided Design of Rectangular and circular Shaped Electrical Furnaces”, The Nigerian Journal of Technological Development
    (NJTD), Faculty of Engineering & Technology, University of Ilorin, Vol. 3 No.1 pp. 63-72. Published by Faculty of Engineering and Technology, University of Ilorin).
  13. Ajiboye, T.K. and G. Adedokun. 2010. “Maintenance Engineering as a Basic Tool for Maximum Production”. Pacific Journal of Science and Technology. 11(2):416-421.
    (Published by Akamai University - Penang, Malaysia)
    http://www.akamaiuniversity.us/PJST.ht
  14. Ajiboye, T. K. 2010 Determination of Cutting Forces and Temperature changes in Heat-Treated Medium Carbon Steel during Lathe Turning Process, Report on three month Fellowship Training Programme, Anna university of technology, Tiruchirappalli, 620 024, India
  15. Ajiboye, T. K. (2004)’ “Computer Analysis of Energy Utilization in an Electrically heated Furnaces”, Technical Report No. 2004-02, Department of Mechanical Engineering, University of Ilorin, Nigeria.
  16. Ajiboye, T. K. (2004), “Computer Applications for Industrial Maintenance”, Technical Report No. 2004-06, Department of Mechanical Engineering, University of Ilorin, Nigeria.