Adegun, I.K.
Senior Lecturer
Mechanical Engineering


His Publication are as follows:

  1. Adegun, I.K. (2005), "Development of a Guineacorn and Rice Mixture Separating Machine", pp 108 - 114.
  2. Adegun, I.K. and F.L. Bello-Ochende (2004), "Mixed Convective and Radiative Heat Transfer in an Inclined Rotating Rectangular Duct with a Centered Circular Tube", Journal of Braz. Soc. of Mech. Sci. & Eng., XXVI(3): ppPP 323 - 329.
  3. Bello-Ochende, F.L. and I.K. Adegun "Scale Analysis of Laminar Forced Convection Within the Entrance Region of Heated regular Polygonal Tubes", pp 28 - 41.
  4. Adegun, I.K. (2003), "Heat Transfer in the Annulus of an Inclined Square Pipe with a Centered circular Tube", Journal of Nse Technical Transactions, 38(2): pp 37 - 51.
  5. Bello-Ochende, F.L. and I.K. Adegun (2002), "Combined Mixed Convecise and Radiative Heat Transfer in a Tilted Rotating Unformly Heated Square Duct with a Centered Circular Cylinder", Journal of Heat and Technology, (1): pp23 - 30.
  6. Bello-Ochende, F.L.  and Adegun , I.K.,  2002, Combined Mixed Ronvective and Radiative Heat Transfer in a Tilted Rotating Uniformly Heated Square Duct with a       Centered Circular Cylinder, International Journal of Heat and Technology, Vol.20,       No.1, pp. 21-30.Published by EDIZION (ETS) Printer, Piazza, Carrara 16-19, 56126 Pissa, Italy.
  7. Adegun, I.K., 2003, Numerical Simulation of  a Convective and Radiative Heat     Transfer in an Oriented Square Duct with a Centered Elliptic Tube, AMSE Journal,  Vol. 72, No.8, pp. 1-17.Published by Association for the Advancement of Modelling and Simulation(AMSE), 16 Av , Grange Blanche, 16160 Tassin La Demi-Lune, France.
  8. Adegun, I.K., 2003, Heat Transfer in the Annulus of An Inclined Square Pipe with A Centred Circular Tube, NSE Technical Transactions, Vol. 38, No. 2 , pp.37-51.
    Published by Nigeria Society of Engineers(NSE)
  9. Bello-Ochende, F.L. and  Adegun, I.K., 2004, Laminar Mixed Convective and Radiative Heat Transfer in an Inclined Rotating Rectangular Duct with a Centered Circular Tube, Journal of the Brazilian Society of Mechanical Sciences-RBCM,Vol. XXVI, No.3, pp. 323-329.
    Published by Brazilian Society of Mechanical Science
  10. Adegun , I.K.,  2004, Effects of Some Variable Parameters on Laminar    Convection in a Gravitationally Inclined Elliptic Pipe, International Journal of Heat and Technology, Vol.22, No.2, pp. 22-28.
    Published by EDIZION (ETS) Printer, Piazza, Carrara 16-19, 56126 Pissa, Italy.
  11. Bello-Ochende, F.L., Adegun, I.K.,2004, Scale Analysis of Laminar Forced Convection within the Entrance of Heated Regular Polygonal Tubes, Journal of Mathematical Association of  Nigeria( ABACUS), Vol.31, No. 2A, pp. 28-41. Published by Mathematical Association of Nigeria’
  12. Adegun, I.K., 2004, Perturbation Analysis of Mixed Convective Heat Transfer in Tilted Regular Polygonal Ducts, AMSE Journal,Vol. 73, No.5, pp. 79-90.
    Published by Association for the Advancement of Modelling and Simulation(AMSE), 16 Av , Grange Blanche, 16160 Tassin La Demi-Lune, France.
  13. Adegun, I.K., 2006, Effects of Thermal Boundary Conditions on Heat Transfer in an   Inclined Rotating Geometry, Journal of Mathematical Association of Nigeria
    (ABACUS), Vol.33, No. 2B, pp. 274-289.Published by Mathematical Association of Nigeria’
  14. Adegun, I.K., 2006, Numerical Investigation of Convective –Radiative Heat Transfer  in a Gravitationally Inclined Rotating Square Duct with a Centered Elliptic Cylinder,
    UnilorinScience and Engineering Periodicals, Journal of Research Information in  Civil Engineering, Vol. 3, No. 1 , pp.138-154.
    Published by Department of Civil Engineering, University of Ilorin
  15. Adegun, I.K., 2006, Development of Guinea Corn and Rice Mixture Separation Machine, Journal of Sustainable Agriculture and the Environment, Vol. 8, No.2, pp. 108-115.
    Published by Federal University of Agriculture, Umudike
  16. Adegun, I.K., 2007, Analytical Study of Fluid Flow and Heat Transfer in the Entrance Region of Heated Concentric Elliptic Annuli, Unilorin Science and Engineering Periodicals, Journal of Research Information in Civil Engineering, Vol.4, No. 1, pp. 68-85. Published by Department of Civil Engineering, University of Ilorin
  17. I.K. Adegun and Yaru, S.S., 2008, The use of Animal and plant Waste for the Production of Biogas, Journal of Sustainable Agriculture and the Environment,Vol. 10, No.2, pp.112-124  Published by Federal University of Agriculture, Umudike
  18. Adegun, I.K. and Oladosu, O.A.,2009, Scale Analysis of Fluid Flow and Forced Convective Heat Transfer in the Entrance Region of Elliptic Conduits, New York Science Journal, Vol.2, No.3, pp. 59-70.Published by Science publication network, New York
  19. Ajao, K.R. and Adegun, I.K., 2009, Performance Evaluation of a Locally Fabricated Mini Cassava Flash Dryer, Journal of Agricultural Technology, Vol.5, No.2, pp. 281-289.
    Published by Rajamangala University of Technology, Tawan-OK    (RMUTTO)
  20. Adegun,I.K, Popoola,O.T. and Faniyan, 2009,Experimental Determination of Micro Climatic Conditions for Human Thermal Comfort in Nigeria, A case Study of Ilorin. International Journal of Applied Engineering Research, Vol. 4, No. 1,pp.77-88
    Published by Research India Publication, India
  21. Adegun,I.K. and Ajao, K.R. ,2009, Evaluation of the Rotor Aerodynamics of a Wind Turbine using combined Blade element and Momentum Theory.
    International Journal of Engineering,Vol.1,No.3,pp.73-83 Published by Science publication network, New York
  22. Adegun,I.K. and Ajao, K.R.,2009, Development and Power Performance Test of a Small Three- Bladed Horizontal-Axis Wind Turbine. Heat Transfer Research, Vol.40, No.8, pp.777-792   Published by America Society of Mechanical Engineers
  23. Adegun I.K., Ajimotokan H.A. and Oyelohunnu G.O, 2011,  The Development of Interactive Software for Assessing Risks and Estimating Industrial Man-HourLoss, International Journal of Research and Reviews in Applied Sciences , Vol. 7,   No. 1, pp. 48- 53.
    Published by Academic Research Publishing Agency, Pakistan
  24. Bello-Ochende, F.L. and Adegun, I.K., 1993, A Perturbation Analysis     Combined Free and Forced Laminar Convection in Tilted Elliptic linders, 6th International Symposium on Transport Phenomena in Thermal Engineering,    Seoul, Korea, Vol. iii, pp. 121-125.
  25. Adegun, I.K., 2001, Designing a more effective Power Plant and Automotive Radiator, Conference on New Products and Technologies for Small and Medium Scale Enterprises, Benin City,. Nigeria, pp. 109-110.
  26. Adegun, I.K., 2001, Recycling of some Wasted Engineering Materials- A case Study of Leaf Spring, Conference on New Products and technologies for Small and Medium Scale Enterprises, Benin City, Nigeria, pp. 170-171.
  27. Adegun, I.K. and Shittu, M.D., 2010, Measurement of Vibration and Engine   Condition Monitoring and Maintenance, Workshop Proceedings on Management and Maintenance of Vibrations in Hydro-turbines and Compressor, held at National Centre for Hydropower Research and Development (NACHRED) Office Complex, University of Ilorin, Technical Transactions, Vol. 1, Part II, pp. 138-150.
  28. Adegun, I.K., 2004, Modern Trolley with a Braking Mechanism, Technical  Paper  No.2004-04, Department of Mechanical Engineering, University of 
    Ilorin, Ilorin.
  29. Adegun, I.K., 2004, Effects of Geometry Parameters on Heat Losses in  Corrugated Bars, Technical Paper No. 2004-05, Department of Mechanical  Engineering, University of Ilorin, Ilorin.