Aweda J. O.


 Brief Profile:

 

 

 


Some of his Publications are:

 

  1. Aweda, J.O. and Jimoh Y.A., (2009); Assessment of properties of natural moulding sands in Ilorin and Ilesha, Nigeria, USEP Journal of Research Information in Civil Engineering. Vol.6 (2), pg68-77. Available online at http://www.usep-rice.com/
  2. Aweda, J.O. and Adeyemi, M.B., (2009); Determination of temperature distribution in squeeze cast aluminium using the semi-empirical equations method. Journal of Materials Processing Technology. 209, pp5751-5759. Available online at http://dx.doi.org/10.1016/j.jmatprotect.2009.06.005
  3. Aweda, J.O. and Adeyemi, M.B., (2009); Experimental determination of heat transfer coefficients during squeeze cast of aluminium. Journal of Materials Processing Technology. 209, pp1477-1483. Available online at http://dx.doi.org/10.1016/j.jmatprotect.2008.03.071
  4. Aweda, J.O. and Adeyemi, M.B., (2009); Effects of squeeze casting parameters on temperature distribution during casting of aluminium. Journal of Applied Science and Technology (JAST). Vol. 14, (1&2); pp67-73. Available online at http://www.inasp.org.uk/ajol
  5. Aweda, J. O., (2008); Improving the electrical properties of aluminium metal through squeeze casting process. NSE Technical Transactions. Vol.43, (4), Oct.-Dec., pp1-17.
  6. Aweda, J.O. and Adeyemi, M.B., (2007); Effects of applied pressure and die temperature on the electrical conductivity of squeeze cast aluminium Rods. Journal of Technological Development, Vol.5, No1&2, pg75-82.
  7. Aweda, J.O., (2007); Evaluation of some squeeze cast parameters of aluminium, USEP Journal of Research Information in Civil Engineering. Vol.4 No 1, pg30-43. Available online at http://www.usep-rice.com/
  8. Aweda, J.O. and Lasode O.A., (2009); A Guide to Report Writing in Engineering, Mechanical Engineering Department, Mechanical Engineering Department, University of Ilorin, Nigeria, 2008-06.